Tag Archives: Brother Printer support

For quick assistance, Call Brother Printer Support Number @ :

How To Fix Common Brother Printer Errors

How to fix brother printer errors E50, 51 and 52? +1-844-828-5593

Most of the Brother Printer errors come in alphanumeric codes. If users are aware of what these codes actually imply then, they can understand the root cause of it and solve those accordingly. If users are accounted with any kind of error messages in the Brother printer then, fix brother printer errors E50, 51 here are list of common Brother printer errors where users can have a close look into it and rectify them further. Let’s have an overview on how to fix common Brother printer errors with their solutions

Steps to fix brother printer errors E50, 51 and E52

  • Error E50

The error “E50 signifies malfunctioning of the printer’s fuser unit: a part of printer which gets warm up and binds the print on a paper immediately. This error further means either the temperature is too warm or it is not warm enough.


Switch off the printer for at-least 5 minutes and then switch it back on again. Leave the printer unattended for a while (for 10 minutes) without directing any command. If this doesn’t work out then, the issue needs to replace the fuser unit immediately.

  • Error: E51

Among other common Brother printer errors, this signifies the laser unit mal-functioning issues. Laser unit tends to write information on the drum surface itself which further indicates a non-detection laser beam issue.


Switch off the printer and then turn it on again. If again you are seeing this error then, the laser flap is defective and yes, its needs to be replaced.

Brother Printer Error: E52

The error clearly signifies that laser motor malfunctioning. Inside the laser unit, there is a spinning mirror and motor that drives it. Thus, this error defines that the motor is in faulty condition


This error can also be resolved by powering off and turning it on again. Power off and on will help users to identify for any available errors. If it is there then, the laser needs replacement.

Brother Printer Error: E54

The error E-54 signifies malfunctioning of the printer’s main motor which holds all drives into the main gear train to run all printing functions accurately.


Switch off the printer and turn it on again. If error continues to appear then, turn on the printer after removal of the toner is made.

Next, check for the proper working of the motor. If it does then, you need to buy another toner. But if the error persists then, then replacement of the main motor is necessary to have.

Brother Printer Error : E60

If users are encountered with this error then, the fan is completely in malfunctioning mode. There are generally four cooling fans in a printer and this error means a serious fault in one of them.


Switch off the printer and turn it on again. In case error continues to persist then, it is advised to seek for immediate help from expert professionals to identify and replace the faulty fan properly.

Get in touch at Brother Printer Repair Service section for resolving any kind of printing issues. We are available all day long to assist users in resolving their problem by applying the best possible methods


How To Fix Brother Printer Error Code E51? +1-844-828-5593

The Brother printer error code E-51 usually occurs due to printer’s laser beam, lid or mirrors that are not evenly placed in appropriate solutions and as a result, this printer error code often is encountered by users while working with the device. Users are further requested to perform a deep check whether the ink cartridge and other features of the printer are well placed in your printer before you start using the device. So, here the blog is all about steps on how to fix Brother printer error code E51 with promising solutions.

Steps to fix Brother Printer error code E51 with promising solutions

Step1: Working with front cover

  • Open the front cover and then leave your device for at least 10 minutes to make it cool down first.
  • Be careful while taking out the drum unit as well as the toner cartridge assembly. It is quite possible that the jammed paper may be pulled out via drum unit or even may be with toner cartridges assembly.
  • This may further lead to releasing of the paper so that users can easily pull it out of the paper tray opening area.
  • At last, close the front cover carefully and proceed with a proper guidance to fix the Brother printer error code E-51

Easy Way To Fix Brother MFC665CW Printer Error Code E51

Step2: Managing the drum unit

  • Be careful not to put the drum unit and toner cartridge assembly directly at back section.
  • Pull the paper tray out of the device completely.
  • Now, slowly pull out the printer’s jammed paper and then open the back cover which should be “face-up output tray”
  • Try to carefully pull down all tabs located towards left and right hand sides to easily open the fuser cover

Gently pull up jammed papers out of the fuser unit from your device.

Step3: Working with the fuser cover

  • Close the fuser cover (1) first and then the back cover which will be face-up output tray
  • Pull up the duplex tray entirely out of your Brother printer.
  • Next, the jammed paper should be out of your machine as well as from the duplex tray.
  • Make sure that you have not left out with any jammed paper under the machine from static electricity.

Step4: Working with the tray

  • Carefully put the duplex tray right towards back of the machine.
  • Next, users are guided to put the paper tray firmly at back side of their device.
  • Pull down the green lock lever device and take the toner cartridge out of the drum unit section.
  • Clear out all jammed paper if you find any inside the drum unit.

Step5: Working with the toner cartridge

  • Place the toner cartridge right at the back side into the drum unit till you hear it locked completely into an appropriate place. The green lock lever will lift automatically, if everything is done accurately.
  • Open the front cover, place the drum unit as well as the toner cartridge assembly back into the device.

Step6: Confirmation phase

  • Do confirm that the toner cartridge and a drum unit in the machine have been properly installed. Next, if the drum unit has not been installed then, this may further cause a paper jam in the Brother printer.
  • Close the front cover next.
  • Make sure that the “Error LED” is turned off and the “Ready LED” light is also turned off.

This is likely to be similar to other Brother Printer models that take the LC57 ink cartridge (DCP130C, DCP330C, DCP350C, DCP540CN, DCP560CN, MFC240C, MFC440C, MFC465CN, MFC5860CN, MFC685CW, MFC885CW.

Resolve your Brother Printer queries by getting in touch with our expert team of professionals at Brother Printer Support section. We are always happy to help you out anytime as and when required.


Ways To Fix The Brother Printer Spooler Service Malfunctioning Issue

A Brother print spooler is a piece of software which helps users to manage all types of print jobs of a printer. In a wide number of cases, a corrupted file or a printing job is an absolute sign of printer spooler malfunctioning issue. Users according to Brother Printer Spooler Support experts should be well aware of the spooler functionality; else the printer spooler can lead to huge crashes and halts leaving all the printing jobs in the queue. In worst case scenarios, issues are pertinent to the printer’s drivers leading to not able to properly communicate with the print spooler service.  This blog has been penned down by experts on various ways to fix the Brother printer spooler service malfunctioning issues.

Resolve The Brother Printer Spooling Error In Easy Steps

Printer Spooling Error

Printer Spooler helps your Windows to communicate with your printer as well as maintains the printing jobs in a queue. If you notice any error messages about it, then it may fail to interact with another software. If you are one of the users with Brother printer spooling error, get in touch with us. We will help you to fix all the errors related to your Brother printer spooler. With the help of our step by step guidance, you will be able to fix the bug on your own.

Easy Steps To Fix Brother Printer Spooler Errors

If you are getting Brother printer spooling error, don’t worry. With the help of the following hacks, you can fix the bug on your own.

Method 1: Restart Your Print Spooler

The “stop” and “start” buttons are located in the print spooler Windows. Click on the “stop” button first and click on the “Start” button again to restart your print spooler. If your printer spooler stops due to any malware attack, restart your spooler bug to fix it.

Method 2: Make The Spooler Automatic

In the printer spooler properties, you can find the option ” Start-Up Type”. Choose the type “Automatic”. Your print spooler bug will be fixed.

Method 3: Delete The Corrupted Files

Delete the corrupted print job, which stopped while you are trying to print it. After deletion, restart your printer spooler. The bug will be fixed.

Method 4: Clear the Print Queue

Firstly, stop the printer spooler and go to the printer administrator option and delete the printer queue. But don’t delete the PRINTERS folder itself. Delete all files inside the PRINTERS folder.

Then start your printer spooler again.

Method 5: Update Your Printer Driver

You may face the errors due to an old version of a printer driver. Try to update your printer driver. If you can’t fix the bug, then try the next step.

Method 6: Delete Your Printer

You may face such kind of errors because of your corrupted printer software. You can follow the guidance to delete your printer. These can help you resolve the printer spooling problem with ease.

  • Unplug your printer or disconnect it.
  • Goto “Device and Printers” and open it.
  • Right click on your Brother Printer  Option.
  • Click Delete on the drop-down menu.

Method 7: Delete The Printer Driver

You have to delete the printer driver after deleting the printer. To delete the printer driver, open the “printer server properties”  and click on the drivers’ tab. Then, select your Brother printer and click on” Remove” to remove your printer. If you choose “Remove driver and driver package,” the installation package will be deleted as well as your printer driver.

Method 8: Scan For The Malware

Scan for the malware and if there is malware present in the system, get rid of it. Then reconnect your printer with your system.

Method 9: Reinstall your Printer

Plug your printer again and try to install your printer. If you deleted your printer package too then, you have to reinstall them again.after reinstalling of the printer software.

Related Post: Brother Printer Spooler Errors?

More Easy Ways to fix the Brother printer spooler service malfunctioning issues

Step1: Working with the brother printer

  • Turn off the Brother printer first.
  • Click on the Windows button or one can tap on the start button from the computer.
  • Find and then carefully open the “Control Panel” icon as advised by Brother Printer Spooler Technical Support

Step2: Administrator tools

  • From there, get an overview of the “Administrative Tools” icon and open it.
  • Find and then open the “Services.” Option section
  • A new window will automatically pop up and users are needed to scroll down and look for the “Print Spooler” option
  • Highlight and then hit the “Print Spooler” option. Over there, simply choose the “Stop” button.
  • Minimizing of the current window is necessary.
  • Open the printer software which you are currently using to view on queue print jobs.

Step3: Deletion of corrupted files

  • Delete any of the available corrupted print job, especially the one which is failed while trying to print it.
  • Next, simply go back to the “Print Spooler” window and hit the ‘Start’ icon.
  • Turn on the printer and perform all the available test print jobs.

Few preventive notes for future to be taken into consideration

  • A regular update, as well as check-ups of the user’s operating system, needs to be performed to  ensure an updated version of the service
  • Update the printer’s drivers carefully to avoid any future glitches.
  • Regularly scanning of the computer should be done for malware issues.

Brother Printer Support

Still Struggling With Brother Printer Spooling Errors? Contact Us: +1-844-828-5593

Come, explore and experience our world-class Brother Printer Customer Support solutions with absolutely feasible costs. We make sure that users are offered the best-in-class industry solutions. We make sure that whatever we deliver are offered at its best.

If you can’t solve the errors on your own, all you need is our expert advice. We have experienced technicians to solve any Brother printer errors with ease. You can simply connect with us via three different methods. Firstly, you can ring us at our Brother printer support number or can drop us a mail at our Brother support mail id. Above all, you can stay connected with our technicians via our Brother printer support portal. Get our support any time at affordable cost. We are open 24*7.


How to delete a Brother Printer from a Macintosh, Mac Computer?

Tired of old and boring printers? You can now access the new ink- or toner-filled Brother printer? It’s not unusual for any small business to work with the multiple printers, each of which definitely requires a different driver for the computer to easily communicate with the printer. If the business is using the Mac computers, it is very obvious that the Brother printer drivers will remain attached to the computer, even if the printer is not in use and is completely disconnected. As defined by Brother Printer Support experts, the printer can easily be removed from the computer’s printer list, by further eliminating the confusion and other clutters of multiple extra printers on the list. Well, the printer driver will not be deleted while removing the printer from the list and it will continue to take up space on user’s hard drive. But thankfully, users have got an option to delete the printer from a Macintosh manually.

Steps to delete a Brother printer manually

Step1: Open up the system preferences.

  • They should further be located in the user’s dock which can easily be found at the bottom of the screen or even from the apple menu section

Step2: Working with the hardware of the Brother printer

  • You will see that in the ‘Hardware’ section, a ‘Print & Scan’ option will appear. Jut tap on it and go next

Step3: Managing the old printer

Step4: Working with the “PLUS” sign

  • At the bottom of the list available, there will a plus(+)sign as well as minus(-) sign.
  • Just click on the minus (-) button again.

Step5: Final stage

  • The user’s old printer has completely disappeared now from the list.
  • You’re finally done!

Get your Brother Printer issues resolved on immediate basis by reaching our Brother Printer customer Support Number USA @ +1-844-828-5593(toll-free). Feel free to call any hour of the day and night to receive quality service at your doorstep. We are all time ready to assist you in order to overcome with your serious technical issues.

How to solve Brother HL-6180DW Control Panel Key not responding Problem

How to solve Brother HL-6180DW Control Panel Key not responding Problem

Among many you came across Brother HL-6180DW control panel key not responding problem. Brother HL-6180DW is machine manufactured for all and wide range from small workgroups to medium organizations with printing features of all-in-one device. The machine was made for performing heavy duty printing as well. The device uses TN780 super high yield toner cartridges that print 12000 pages. With the same capacity, frequency and high –volume printing makes it more prone to mechanical and network issues arrival common. Get Brother Printer Technical Support for the mentioned issue and get resolved under the trained technicians:

Brother HL-6180DW Control Panel Key not responding fixed via following the below mentioned steps:

Step 1: Restart the device

Unplug the Brother HL-6180DW printer as disconnecting the device for some time say for approximately 30 seconds. Switch power back on.

Step 2:  Check for LCD display

Look for the display showing date, time along with other options. If yes proceed to next step

Step 3: In case LCD display is blank check for the power supply wire if it is properly connected or not. You might require plugging in directly on a wall socket using surge protector.

Step 4: Test for key response

Carry test for the Control panel key by pressing the dial pad and see if it responds accordingly on the LCD display

Step 5: If you receive no response from the control panel key on the LCD display, massage each key in circular motion which will force any possible stuck keys.

Step 6: Run the test again by pressing any key on the dial pad.

After the above steps performed and still keys are not working it is high time to get in touch with Brother Printer Customer Support Number USA @ +1-844-828-5593 (toll-free) for the proper guidance from the trained technicians.  As there may be chances after you have tried your best to solve the control panel key not responding issues. It is always better to get basic troubleshooting done under the proper guidance of the experts how actually work frequently with such issues. Get the problem resolved and enjoy your printing.

Steps to troubleshoot pdf file printing issues in Brother Printer

Easy Ways To Fix Brother Printer PDF File Printing Issues

PDF file printing issues can take place due to variety of reasons and one such reason is due to communication glitz between the computer and the laser printer. When this occurs, the PDF file printing process could not be completed at all. In this case, as said by Brother Printer Support experts, the printer could be at its severe fault; possibly there could be bugs to the software.  It may also happen that the PDF file is fully corrupted. Further, it may seems that the actual source of the trouble can never be accurately pinpointed. But our expert Brother printer technicians have managed to “troubleshoot the PDF file printing issue in the Brother printer”

Steps to troubleshoot pdf file printing issues in Brother Printer

Step1: Have a close look at the printer hardware.

  • This issue could be from a loose connection, particularly if there are connecting cables to the computer and the printer. A loose power connection can also be one of the culprits if the plugs are not accurately connected to the power outlet. Users are advised by Brother Printer Technical Support professionals to try unplugging the printer from the USB hub carefully and then plug it directly to the USB port of the computer again. Well, if the above sequence fails to function, then the printer should be switched off and turn it on after sometime. This could improve the connectivity status of the devices. The last solutions could be to check for the printer driver whether it has been upgraded or not?

Step2: Check for the PDF file for printing issues.

  • The PDF file may appear to be fine on the computer monitor but it may also appear to be deceiving. But it will definitely contain a missing or even corrupted data. To resolve the issue, users should go for the Print Image option and ensure that the laser toner cartridge has enough toner to use. Alternatively, one can surely recreate a new PDF file with its revised name and try to print the PDF file again

Step3: Lastly, the software could be the source of the PDF file printing problems.

  • Always remember that all the common solutions that are described above can be well applied to resume the printing process of PDF files or hard copies again.

After the above steps performed and still keys are not working it is high time to get in touch with Brother Printer Customer Support Number USA @ +1-844-828-5593 (toll-free) for the proper guidance from the trained technicians.  Come and explore our top-class Brother printer service solutions


How to Fix Factory Re-Set a Brother Printer to Fix Toner, Drum and Error Lights?

If users are having a Brother HL-2240, HL-2230, HL-2270DW, or HL-2280DW desktop printer connected to their PC or even with the Mac device, they surely with no doubts will experience toner error light or drum error or even just the error light up from time to time. Often this just seems to be with the system which is getting wrong and sometime it will even throw up a toner error light or drum error as per as professional by a team of Brother Printer Repair Service professionals.

Guide to factory re-set a Brother printer to fix toner, drum and error lights

These promising steps will completely reset the printer. Follow all the appropriate steps to get rid of the toner error light on a Brother laser. This is not only software solution but it works on windows XP,7,8, 10 etc and also works on Linux as well as OS X.

Step1: Factory reset

You are first required to factory reset the Brother laser printer

Step2: Turn off step

Turn off the Brother printer thereafter.

Step3: Go button

Next, please press and then hold down the “go” button.

Step4: Held the go button

With the go button still held, you are required to turn it on back again.

Step5: Release the button

When all the three lights flash up, then release the button and press the go button for at -least ten times.

Step6: Ready lights

Wait for the ready lights until the ready light is lit up again. This will take little moment to complete the process

Step7: Factory reset

Your brother laser printer should now be in full factory reset and all the other error lights (toner, drum and error) will be stop flashing.

If you still have issues related to Brother Printer, come and get in touch at our Brother Printer Customer Support +1-844-828-5593 professional section to get your headache solved instantly. Ours is a 24 hours 365days in a year support service available for users.


How To Solve Brother MFC Printer Error “unable to clean” 5a & 50?

Printing all of your essential documents right from the compatible mobile device with the Brother printer is every user’s choice, which will further feature Apple Air Print, Google Cloud Print and Brother I Print&Scan functionalities. After a thorough study was conducted by Brother printer Support team members, it has been found that the 1.8″ color LCD simplifies all types of setting adjustments on the printer, and on the other hand, an automatic double-sided printing helps users to save their time as well as paper.

A step by step guidance to fix “unable to clean” error 5a & 50 on Brother MFC printers:

  • Machine off:

At first make sure that your machines are off

  • Menu button:

Here, according to Brother MFC printer technical support experts, a user needs to switch on the machine while holding down the “menu” button till all the leds come in state of flashing on/off. Now you are in “maintenance” mode.

  • Press 80:

The next step will be for users which will ask them to press the “80” button

Mono start:

Press the “mono start” button for several times till you see a “purge: xxxx” message

  • Press “2783” :

In order to reset the purge counter, a user needs to press the “purge:0000” option

  • Stop :

Press the “stop” button thereafter.

  • Press “99”:

This button should be pressed to proceed with the exit the maintenance mode option.

Fix all your critical Brother Printer snags with us

We a Brother Printer customer support experts effort by proceeding with the expansion as per as technical support industry by striding up the old business scenarios into more superior manner by interacting with our customers more closely. Our support administrations work beyond an idea of prompt approach to deliver a comprehension between professionals and technicians to experience world class Dell support solutions. Technicians are purely inclined towards solving critical to critical issues instantly.  Our services ranges into the category of best in industry solutions and this is what makes us stands out the best among other top brands.

brother printer support

How to Fix Brother Printer Error Code “E52″?

Brother printers are highly popular for creating high resolution images at a reduced price. However, you might encounter few error messages while using the Brother Printers. Printer failure and the obsolete printer drivers are the main causes of Fix Error Code “E52″ in Brother Printer. For Brother Printer Repair Service, contact us.

Follow the procedure given below for resolving or fixing error code “E52” in the Brother printers.

  • Fix the laser unit
  • Manual resolution
  • Driver updates

Fix Laser Unit

The main cause of the “Error E52” is the loose cables connected in the laser unit with the printer. To fix this issue, you require inspecting the cables connected with the LCD panel of the printer. You also require cleaning the inner components of the laser panel and then connect them in the right manner. This will fix the issue certainly.

Manual Fixing

It is the best method to fix the error code “E52″ in the Brother printer. This error can happen because of the similar physical issues or the high voltage discharge. To resolve this issue, it is necessary to inspect the voltage settings in the printer. You require removing the printer from the main socket, if the voltage at that instance is too high. Inspect the connection cables and ensure that they are in correct position.

Driver upgrades

An obsolete Brother Printer driver can be the main reason of “Error E52”. Updated drivers are essential for the correct functioning of the hardware devices. The hardware devices might not work correctly, if the drivers are obsolete. You need to ensure that you will regularly upgrade the Brother Printer drivers in your PC.

Why You Should Call Brother Printer Customer Support?

Dial our toll-free number +1-844-828-5593 any time, round the clock for quick online assistance for all the technical issues related to the Printers. If you are looking to contact Brother Printer Customer Support to resolve your problem, please get in touch with our Brother Printer Support to get the best customer support service at highly reasonable charges.

Error Code 36 in Brother Printer

How to Resolve Brother Printer Error Code 36?

The error code 36 in the Brother printer occurs because of some technical issue or damage in the physical component. This error code is also known as carriage unit travel issue. For instant technical assistance contact Brother Printer Technical Support.

To resolve error code 36 in Brother Printer you need to perform or follow the following procedure given below:

  • Replace Damaged Parts
  • Remove Paper and Restart

Replace Damaged Parts

  • You can easily resolve the error code 36 by replacing the damaged parts in the Brother printer.
  • It is essential for you to replace the carriage unit, head, carriage PCB, and carriage motor, if you want to fix the error code 36.
  • You might also require replacing the power supply PCB if it is destroyed.

Remove Paper and Restart

  • After receiving the error code, you require to open the printer to inspect its inner components.
  • You might view various pieces of papers stuck inside the printer as you open various printer covers such as front, paper tray, back and many more.
  • You can fix the issue by removing these papers and the next step is to restart the printer.
  • You also need to carefully read the installation manual of the printer and if necessary get help from a reliable and trusted technical support service provider.

Why You Should Call Us?

Dial our toll-free Brother Printer Repair Service number +1-844-828-5593 for quick online assistance for resolving technical issues relating to the brother printers. Our brother technical support service is available for resolving technical issues of our customers.And also our Canon printer technical support technicians are always ready to sort out each and every printer technical issues with instant solution. We also provide instant remote support for Epson Printer  support services for your common printer errors such as Software installation issues, Driver Upgrade, Change Printer ink, Printer Spooler and Paper Jam issues etc.Please get in touch with our technical support team and will receive online remote technical help service at highly reasonable charges.

We understand that technology is designed to make our lives simpler; it can also be a continuous source of stress and headaches when it doesn’t work properly. That’s why our world class online tech support service provides 24*7*365 technical support for your home or business technical requirements.