If you are getting brother DCP-J125 printer error code 50, which mean your printer is unable to print. This error is commonly occurring, due to the print head issue. The print head is the cartridges that sit in the inside of the printer. Then don’t worry about it, we are here for your help. Just get in touch with our brother printer technical support team of professionals to solve out the error instantly. Therefore, our blog will help you through various steps on how to Fix Brother DCP-J125 Printer Error Code 50.
Steps to resolving your brother printer error code 50:
Step1: Disconnect the Brother machine
You should try to disconnect the Brother Printer from the power outlet.
Step2: Pulling up Cover
You should try to open the scanner cover just through pulling up on the lower right corner of the cover.
Step3: Check the print head’s Location
Ensure by checking the print head location, mean it’s positioned at the left-hand side of the platen area. If it’s not, then put it in the right place.
Step4:.Gently Moves the Printhead
Try to gently move the print head to the center position.
Step5: Verify the print head
You should try to examine if you will find anything in the print head, and remove it.
Step6: Reconnect the Printer
You should try to close the cover and reconnect your brother printer to the power outlet.
Step7: Remove Ink Cartridges
If still you are receiving, this brother printer error code 50, then you must try to remove all ink cartridges, and then turn off your printer, so turn it upside down and then shake it some seconds to fix it.
Well, all the above methods will help to solve your issues in an instant and easy way.If you need any further help or support to fix other kinds you brother printer issues, then feel free to ask your any question by connecting our brother printer customer support department. Our qualified and experienced technical professionals are available 24×7/365 days to help you.